세광쇼트기계

본문 바로가기

Shot Blasting Equipment

Belt Conveyor Type

It is the system that the product which passed the cabinet through the belt conveyor has a surface treatment with an abrasive material throwing from the impeller installed at the upper parts of the cabinet. And it can maintain the high quality by automatic transfer, and mass production is possible.

Features and types

ITEMS / MODEL NO. SKCBW450-238 SKCBW450-438
DRUM WHEEL SIZE 1300W x 5500L x 2100H 1600W x 6000L x 2200H
MAX. DIEMENSION OF WORKPIECE Φ450 x 200H Φ600 x 200H
TREATMENT CAPACITY 100~150PCS/HR 200~240PCS/HR
RANGE OF LINE SPEED 1.0~2.0M/MIN 2.0~4.0M/MIN
IMPELLER SPECIFICATION Φ380 x 75W Φ380 x 75W
POWER & Q’TY OF IMPELLER MOTOR 15HP x 2SETS 15HP x 4SETS
WEIGHT OF ABRASIVE FLOW 360KG/MIN 720KG/MIN
DUST COLLECTOR 75M³/ MIN 150M³/ MIN
DUST REMOVAL METHOD AIR PULSE TYPE
USES CLEANING, PRE-TREATMENT FOR COATING, PRE-TREATMENT FOR PAINTING, OTHERS
APPLICATION AL WHEELS, CRANK SHAFTS, CAM SHAFTS, ETC.
REMARKS

The types above are the production standard of Aluminum wheel. As the quality of the impeller unit depends on production casting goods, yields, and the velocity of the treatment of crank shaft, select a type after consultation with us.

Features

  • It removes burr and scale of the aluminum casting product effectively.
  • The thrown shot ball is collected effectively through the belt conveyor hole, and it performs effective work and high productivities by successive input.
  • It minimizes the amount of dust scattering from shot ball around the workers using Hi-Cr plate attached on the wall at the door of Shot blasting room.
  • It amplifies the efficiency of the investment and the purifying effect by removing shot ball remaining at the upper part of the products by installing powerful blow-off at backside room.
  • All the operations of the work can be operated successively with one touch control system.